Review Absolutely GREAT Computer Desk Table!!!
So cute computer desk table, it's simple but elegant looking. The color is black walnut which matches our furniture in the house. It arrived on time, well packed, with cushion in between thte wood & metal stand and the items are complete. Product dimension is 30-1/4" (H) x 39-1/2" (L) x 21-3/4" (W) using my tape measure :) It has assembly instrcutions manual that is easy to follow, each part of the wood/metal has numbers from 1 to 15 and the screws has letters from A to H. I assembled it myself which is a no brainer as long as you read the instructions properly.
L-shaped Computer Desk
The tabletop has 2 bottom drawers that has cut-out handle and with metal track so it's easy to glide it in and out. Once I attached the push to open drawer slide together with the bottom shelf and the drawers, it was very smooth and quiet to open it. The old desk table I used didn't have push to open drawer slide so it's loud and hard whenever I open and close it. It has 4 sturdy steel upright legs and an additional steel support cross bar to keep the desk in place without tipping over. The desk can hold up to 165 lbs with evenly distributed weight which is pretty much just okay for my laptop, books and other gadgets I have.
To make sure you assemble it right:
1. Get #3 (2pcs) metal stand and attach #5 metal bar using letter F screws (2pcs) in front and attached #6 (back part wood) using letter H screws (4pcs)
2. Take wood # 10, 11 and 12 and attached it with letter D (push to open drawer slide - base part) using letter C screws. All the small cut wood for the drawers has small hole so it's better if you drill it first with the letter C screws then take it out so once you're on the last part it will be easier for you to screw them up again without getting messy on the table.
3. Put #2 (lower big table) on top of the metal stand once it's standing and screw it with letter E (4pcs) on top and screw the bottom using letter I screws (2pcs)
4. Take wood # 10, 11 and 12 on top of wood #2 (lower big table) and attached #4 wood at the back using letter B screws (7 pcs) in the middle and letter A screws on the sides. When done you can use all letter B screws to the bottom. Remember, there's a logo LANGRIA at the back of wood #4 so that should be seen outside.
5. Attached top table #1 on top using letter A screws and lock all the round metal that came with it by clockwise turn.
6. Now time to assemble the drawers: Attached the outer part of the push to open drawer slide to the outside bottom side of the drawers. Then attached the wood using # 13, 14 and 15 with letter G screws. #13 wood should be on the left, #15 should be at the back middle part of the drawer and #14 is on the right of the drawer. Make sure the line where you put the shelf should be connected to each other so it will fit once you're on the second to the last of assembling the table. If you did it right, you can now attached the shelf and finally close it with #9 wood using letter A screws and lock the round metal part clockwise.
7. Insert the drawers to the base of the push to open drawer slide.
It's a very good looking desk top table, not too big and not too small. Very happy of my purchased.
L-shaped Computer Desk
The tabletop has 2 bottom drawers that has cut-out handle and with metal track so it's easy to glide it in and out. Once I attached the push to open drawer slide together with the bottom shelf and the drawers, it was very smooth and quiet to open it. The old desk table I used didn't have push to open drawer slide so it's loud and hard whenever I open and close it. It has 4 sturdy steel upright legs and an additional steel support cross bar to keep the desk in place without tipping over. The desk can hold up to 165 lbs with evenly distributed weight which is pretty much just okay for my laptop, books and other gadgets I have.
To make sure you assemble it right:
1. Get #3 (2pcs) metal stand and attach #5 metal bar using letter F screws (2pcs) in front and attached #6 (back part wood) using letter H screws (4pcs)
2. Take wood # 10, 11 and 12 and attached it with letter D (push to open drawer slide - base part) using letter C screws. All the small cut wood for the drawers has small hole so it's better if you drill it first with the letter C screws then take it out so once you're on the last part it will be easier for you to screw them up again without getting messy on the table.
3. Put #2 (lower big table) on top of the metal stand once it's standing and screw it with letter E (4pcs) on top and screw the bottom using letter I screws (2pcs)
4. Take wood # 10, 11 and 12 on top of wood #2 (lower big table) and attached #4 wood at the back using letter B screws (7 pcs) in the middle and letter A screws on the sides. When done you can use all letter B screws to the bottom. Remember, there's a logo LANGRIA at the back of wood #4 so that should be seen outside.
5. Attached top table #1 on top using letter A screws and lock all the round metal that came with it by clockwise turn.
6. Now time to assemble the drawers: Attached the outer part of the push to open drawer slide to the outside bottom side of the drawers. Then attached the wood using # 13, 14 and 15 with letter G screws. #13 wood should be on the left, #15 should be at the back middle part of the drawer and #14 is on the right of the drawer. Make sure the line where you put the shelf should be connected to each other so it will fit once you're on the second to the last of assembling the table. If you did it right, you can now attached the shelf and finally close it with #9 wood using letter A screws and lock the round metal part clockwise.
7. Insert the drawers to the base of the push to open drawer slide.
It's a very good looking desk top table, not too big and not too small. Very happy of my purchased.
Nhận xét
Đăng nhận xét